Pre-installation checks for SL Boilers
The pre-installation requirements here are located in the printed manual on Page 7.
As the installer, you should perform the following pre-installation checks before installing an SL boiler.
Avoid contamination of combustion air source
Install a boiler in areas where the combustion air source is not subject to chemical fouling or agricultural vapors:
Avoid areas where water leakage can cause damage
Precautions at a new construction site, or during renovations
Check venting when boiler is in operation
Assess the impact of the steam plume normally experienced at the exhaust terminal of a condensing boiler:
Protective measures for condensate discharge
Electrical information and checks